background image

www.lorexcctv.com

SG21FD3044-161 

Page 1

Version 1.01

Package Contents

1

Connect cameras to the monitor

4

Turn the Master power switch located at 

the back of the monitor ‘ON’.

2

Connect one end of the ethernet cable to a 

broadband router (not included) and the other 

end to the back of the monitor.

5

Press the Standby button to view 

picture images.

3

Connect one end of the power adapter (stan-

dard power cable) to the monitor, the other 

end to an electrical outlet.

Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Technology and our subsidiaries reserve the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE © 2006 LOREX. All rights reserved.

BACK OF THE MONITOR

BACK OF THE MONITOR

BACK OF THE MONITOR

FRONT OF THE MONITOR

BACK OF THE MONITOR

ROUTER (NOT INCLUDED)

4 Color cameras are included with the Observation System. These cameras have 

a single cable, and receive power directly from the Observation System.

1. Connect the female end of the supplied 57’ extension’ cable to the camera

2. Connect the male end of the supplied 57’ extension cable to an open DIN 

    channel on the back of the Observation System. Continue connecting 

    additional DIN cameras.

1 - Set up CD Rom (placed inside the owner’s manual)
1 - Owner’s Manual
1 - Quick Installation Guide
1 - Power Cord
2 - keys (for Hard Drive Bay)
1 - Network Viewer Guide
2 - Warning Decals

1 - 21” Color Monitor with Built-in Digital Video Recorder
1 - 160 GB Hard Disk Drive (installed inside hard drive bay)
1 - Remote Control with batteries
4 - Colour cameras with sunshade housing
4 - Camera brackets with mounting screws
4 - 100ft (30m) Extension Cables for camera
1 - 10ft (3m) Ethernet network cable

STEP 1

SETTING UP YOUR MONITOR FIRST

10:00

STEP 1 SHOULD TAKE 
APPROXIMATELY 5 - 10 
MINUTES TO COMPLETE

NOTE: The arrow mark on 

top of the 6 PIN camera 

cable(s) should face 

UP while inserting the 

6 PIN camera cable(s) 

to the Monitor’s 6 PIN 

connector(s).

21” FLAT SCREEN CRT/DVR OBSERVATION SYSTEM WITH 4 
NIGHT VISION CAMERAS

1 - Broadband Router and Computer Required, not Included

Отзывы: