Lorex NTSC, Инструкция по эксплуатации

Страница: 9 / 20

17
Digital Day&Night Vandal Dome
MANUAL : Manual lens selection
DC : Auto iris lens selection
3. Please press the SETUP button if you wish to return to the previous menu
16
Digital Day&Night Vandal Dome
Camera Operation
SETUP
LENS MANUAL
SHUTTER ESC
WHITE BAL. ATW
BACKLIGHT OFF
AGC LOW
DNR LOW
SENS-UP OFF
SPECIAL
EXIT
Modes can be changed
using the LEFT and
RIGHT buttons. Select any function you
wish to operate by
using the UP and
DOWN buttons.
3. Please press the LEFT or RIGHT button if you wish to change mode.
When the LEFT or RIGHT button is pressed, available values and modes are
displayed in order. Please keep pressing the button until you get to the mode you
wish to operate.
4. Please select 'EXIT' and then press the SETUP button to finish the setting.
This function is used to adjust the brightness of the screen.
1. When the SETUP menu is displayed on the screen, please position
the arrow to point to 'LENS' by using the UP and DOWN buttons.
2. Please select the type of the lens you wish to use by pressing the
LEFT or RIGHT button.
Note
• If appears at the mode you wish to operate, it means that there is a
sub-menu which can be selected by pressing the SETUP button.
• If appears at the mode item, it means that there is no mode
available to be selected.
LENS (selection)
SETUP
LENS DC
SHUTTER ---
WHITE BAL. ATW
BACKLIGHT OFF
Note
• The brightness of the screen can be adjusted in DC mode. The brightness
can be adjusted within the range of 1 ~ 70. The optimum level of brightness
for the user can be achieved by adjustment.
• If you select the MANUAL mode, it can be adjusted in ESC mode.
brightness