MONITOR CONTROLS - BACK PANEL
1. AC Input
- This Cord is used to connect the supplied power cord from the monitor to an
electrical outlet. AC 100V ~ 240V, 50/60Hz.
2. Power Switch(main power switch)
- This button controls power to the entire unit.
Depress the side with the ‘I’, to turn power ON. Depress the ‘O’ side to turn the unit OFF.
3. Alarm Output
- To use the VCR, connect Alarm Output with Trigger-In & Ground of VCR.
When sensor is detected, the picture will be automatically recorded on the VCR.
4. Door Lock
- Connect Door Lock to this terminal with normal wires (not supplied).
5. 6 Pin Din Camera Inputs
- Channel 1-4 camera inputs (for camera switch 6 pin din camera
Inputs)
6. VCR Audio/Video In
- Use with A/V cables (not supplied) to receive audio & Video from
an V.C.R
7. Audio/Video Out
- Use with A/V cables (not supplied) to transmit audio & Video from
the monitor.
8. Slave Audio/Video Output
– Use with A/V cables (not supplied) for use with a slave
monitor
9. Extra Audio/Video In
– Connect Extra camera video signal to BNC plug and audio signal
to RCA plug.
-9-
