Montage der Dachhaken
8
Fitting the end clamps
Positioning the end clamp
Installation of the module
Clicking the central clamp into place
3.2
Laying the cables
!
Please make sure that the string cabling is laid before
mounting the modules.
Prepare the cable entry into the roof, extending the module circuit
cable if necessary. When mounting the solar modules, it should
simply be a question of connecting them. Fit the cabling inside or
alongside the rail using cable ties or cable clips so that the cables
do not sag or rest on the roof. Click the solo clip into place on the
rail, as required.
3.3
Mounting the modules
!
Always follow the mounting instructions provided by
the module manufacturer in order to ensure that any war-
ranty rights are protected.
This is particularly important when it comes to the positioning of
fixings. Do not under any circumstances stand or put any weight
on the modules. There is a risk that they might break. Install the
modules with the junction box at the top to avoid the risk of
moisture ingress.
Begin by mounting the top row of modules. To do this, fit the
clamps into the U-shaped one side and press down on the other
side of the clamp until you hear the click.
Make sure the clamp is in the right position.
Lay the solar module onto the U-shaped rail and fix into place
using the end clamps.
Then click the central clamps into place and slide them onto the
fixed module.
Installation
Fastening the cable using a clip
