Gas Lift
Base
Casters x 5 Pcs
Seat/Mechanism
(pre-assembled)
Armrest x 2 Pcs
Armrest Screws
(M8 x 25mm)
x 2 Pcs
Allen Wrench
Back
Back Screws (M8 x 20mm)
x 3 Pcs
1
2
3
4
7
6
5
9
8
ASSEMBLY INSTRUCTIONS
PARTS LIST
Remove all parts from carton and confirm all pieces before assembly.
STEP l: l. Insert casters into base.
2. Insert gas lift into base.
STEP 3: 1. Insert armrest into the seat/mechanism.
2. Tighten screws.
STEP 4: 1. Insert assembled back into
seat/mechanism.
2. Tighten screws.
• Use this product only for seating one person at a time.
• Do not use this chair as a step stool / ladder.
• Do not sit on any part of the chair except the seat.
• Do not use chair on uneven floor surfaces.
• Do not use chair unless all bolts, screws and knobs
are tightened.
•
Every six months, please make sure all bolts,
screws and knobs are fully tightened to ensure
stability.
• If any parts are missing, broken, damaged or worn,
stop use of the product until repairs are made using
factory authorized parts.
• Dispose of packaging properly. Plastic bag is not
a toy. Do not use plastic bag as head covering –
it may cause suffocation.
• Failure to follow these warnings could result in
serious injury.
Preventive Maintenance and Warning
STEP 2: Insert seat/mechanism onto the
gas lift.
Executive Highback Mesh Chair
LLR20979/20980
