Lopi Spirit DV EF, Руководство пользователя

Страница: 20 / 36

18
Operation
Travis Industries
4041220
1 0 0 - 0 1 1 5 3
Safety Notice
Read this entire manual (especially the “Safety Precautions” on pages 2 and 3)
before using this stove. Failure to follow the instructions may result in property
damage, bodily injury, or even death.
Location of Controls
Swing the control cover to the
right to access the gas control
valve, igniter, and blower control.
Gas
Control Valve
Blower Knob
BLOWER
LO
OFF
HI
PILOT
IGNITER
Pilot Igniter
ON/OFF
Switch
The on/off switch
is located on the
right side of the
control cover.
The Pilot Flame can be
found below the back log
on the left side.
O
F
ON
F
Gas Control Knob
Flame Adjust Knob
On/Off Switch This control is used to turn the main burner on and off.
Gas Control Knob This knob is used to control gas to the heater and for starting the pilot.
There are three positions, ON, OFF, & PILOT. The pointer to the left of
the knob indicates the position this knob is in.
Flame Adjust Knob This knob controls the flame height from low (“LO”) to high (“HI”). The
pointer above the knob points to the position this knob is in.
Pilot Igniter The pilot igniter is used only to start the pilot. When pressed, it sends an
electrical charge to the pilot assembly. This creates a blue spark directly
next to the pilot, igniting the pilot flame.
Optional Blower Control This knob controls the speed of the internal convection blower that
pushes the heated air into the room.
? If using a remote control or thermostat, the On/Off Switch must be left “ON”. Turning the On/Off
Switch “OFF” will keep the heater off always.