7
1. Place the tool, head downward, and hold it in a
vertical position.
2. Release pressure by twisting the handle clockwise
(37) and press down.
3. Remove the body handle assembly (78 - 80)
4. Pump the handle several times and release pres-
sure. Repeat this procedure several times. This will
clear any air bubbles in the hydraulic system.
5. Holding the pump handle in the closed position,
remove the reservoir cap (76) with care as air
bubbles may remain in the end of the oil reservoir.
6. Fill oil (Shell Tellus oil T15, Mobile DET-13, or
equal) and reset the cap.
7. Check the oil reservoir for pin holes by squeezing
reservoir with fingers. If any leaks are detected,
replace with a new reservoir (76).
REFILL OIL
