4
1.
TO INSERT A DIE IN THE TOP OF THE HEAD
(6). Push
the die release button (4) and place one die of the set in the
top of the head, center it and release the button.
2.
INSERT THE OTHER DIE IN THE BOTTOM OF THE
HEAD
.
Depress the die release pin (15) and place the other
die of the set in the bottom of the head and release the pin.
The die will be held by the retainer pin (13). If it is difficult
to depress the die release pin, pump the handle several
times, this will expose the pin.
3.
THE HEAD OF THE COMPRESSOR WILL ROTATE 180
DEGREES
.
The head can be rotated to any desired position
to accommodate operator’s view of the dies, fitting posi-
tion and operation.
CAUTION
Do not rotate the head under hydraulic pressure.
OPERATING INSTRUCTIONS
Die Release Button
(4)
Die Release Pin
(15)
Retainer Pin
(13)
Head
(6)
