www.LoosSeismicBracing.com
Toll Free: 800-321-LOOS (5667)
Finished sleeve should look like this. Be sure sleeves have been
compressed the proper number of times.
(See NUMBER OF COMPRESSIONS table).
Use the swaging gauge provided with the tool to check proper after
swage diameter of sleeve.
Compressed sleeve should slide freely into corresponding size and
color slot in gauge.
Figure 5
Figure 4
3
Keep jaws of swaging tool at right angles to the sleeve to be com-
pressed, making sure the sleeve is aligned in the jaw grooves.
Close tool completely. Tool handles should snap shut indicating
complete closure.
