WLAN Broadband Router
User Manual
- 30 -
4.3.4
TCP/IP Settings
4.3.4.1
LAN Interface Setup
This page is used to configure the parameters for local area network that connects to the LAN ports of
your WLAN Broadband Router. Here you may change the setting for IP address, subnet mask, DHCP,
etc.
Item
Description
IP Address
Fill in the IP address of LAN interfaces of this WLAN Access Point.
Subnet Mask
Fill in the subnet mask of LAN interfaces of this WLAN Access Point.
Default Gateway
Fill in the default gateway for LAN interfaces out going data packets.
DHCP
Click to select
Disabled, Client
or
Server
in different operation mode of
wireless Access Point.
DHCP Client Range
Fill in the start IP address and end IP address to allocate a range of IP
addresses; client with DHCP function set will be assigned an IP address
from the range.
Show Client
Click to open the
Active DHCP Client Table
window that shows the
active clients with their assigned IP address, MAC address and time
expired information.
[Server mode only]
