Look 795 BLADE RS 2019, Руководство пользователя

Страница: 17 / 22

16
EN
Your AEROPOST 2 seat post gives you the option
to cut it according to the cutting instructions marked
on your seat post (Fig. 18-1), be sure to protect the
surfaces of your seat post to avoid damaging them
during the cutting. Use a cutting tool with a blade for
carbon fibre.
Check before cutting :
There must be at least 140 mm between the cut line
and your set position (Fig. 18-2).
1 / Fit your seat post and set the saddle height you
want, lock your seat post.
2 / Note the excess length using the graduated marks
on the front part of the seat post.
3 / Remove your seat post and measure the desired
cutting line to the graduated mark matching your seat
excess length (Fig. 18-1). If this length is less than 140
mm, you must cut on the mark below the chosen one.
L min = 140 mm
Desired cut
Graduated mark matching your
saddle excess length
Fig. 18-1
Fig. 18-2
Cutting the AEROPOST 2 seat post
IMPORTANT:
Before cutting your seat post, check that the minimum insertion is has been met.
AEROPOST 2 SEAT POST