Look 795 BLADE RS 2019, Руководство пользователя

Страница: 14 / 22

13
EN
The AEROPOST 2 system includes an elastomeric
ring that helps filter road vibrations and provides the
saddle with some give, increasing cycling comfort.
1 / Place the saddle on the head of the AEROPOST 2
2 / Insert the upper bracket bearing the logo " Ø7 "
(Fig. 15) if you want to use a Ø7 round rail saddle or
the bracket marked "Ø OVERSIZE" (Fig. 15) for an
oval rail saddle.
3 / Then insert the lower bracket 8 (Fig. 15) under the
saddle rails.
4 / join the two lower flanges and tighten previously
greased screw 10 (Fig. 15) to the indicated torque
of 6 Nm when your saddle is correctly positioned
AEROPOST 2 SEAT POST
Fig. 15
Fig. 14
1
AEROPOST 2 tube
2 Comfort elastomer
3
Short offset head
4 Long offset head (optional)
5
Head fixing screw (x2) - TORX T25 - 4 Nm +
LOCTITE 243™
6 Domed washer for screws (x2)
7-1 Upper support (for round saddle rails)
7-2 Upper support (for oval saddle rails)
8 Lower support
9
Lower flange and screws - HEX 4 mm Allen - 6 Nm +
grease
10 Plastic battery bracket
11
O ring
12 Battery (not supplied in the kit)
FITTING the saddle onto the seat post
7-1
7-2
8
9
5
6
3
4
2
1
10
11
12
N° Désignation
1 Tube de selle AEROPOST 2
2 Elastomère de confort
3 Tête court déport
4 Tête long déport (optionelle)
5 Vis de fixation de tête (x2)
6 Rondelle cuvette sous vis (x2)
7-1 Support supérieur (pour rails de selle ronds)
7-2 Support supérieur (pour rail de selle ovales)
8 Support inférieur
9 Bride et vis inférieurs
10 collier de fixation plastique
11 Joint torique
12 Baterie (non fournie)
1 /
3 /
2 /
4 /