８
８
８
８
/ 18
5.
Installation
5.1 In General
This machine is only suitable for indoor use and must be installed in a cool, ventilated, stable
surface, away from hot objects. Leave at least 10cm (4’’) space at the back of the machine and
leave enough space for machine at the right and left side. We suggest that the installation take
by professional people.
5.2 Connect With Water Supply
Please install the machine near the water supply (not more than 3 meters far, water pressure
between 0.2 – 0.6MPa). Before installation, please check if all the accessories are all there. (a
three-way ball valve, elbow quick connector, PE pipe )
5.2.1.
Please shut off the water supply, and take off the faucet by turning
counterclockwise, see
picture 1.
Picture 1
5.2.2.
Please wrap the three-way ball valve with tap (special tap for water sealing). Then install it
with water supply pipe in one side, and with faucet on the other side, make sure it seals well.
Then connect the three-way ball valve with PE pipe, see picture 2.
Picture 2
5.2.3.
Connect the other side of PE pipe with the water inlet connector of machine. Firstly take off
the buckle and cap of connectors. See A-1 and A-2 in Picture 3. (Note when take off the cap, you
need to press the buckle) Insert PE pipe into water inlet connector, then install the buckle. See
