１６
１６
１６
１６
/ 18
First please turn off the water supply and electricity supply. Remove the decorative panel,
you will see the hot tank cover (check Picture 4). Use tool to open the hot tank cover, then
put clean water into hot tank. Use soft cloth or soft brush to clean the hot tank. After that,
take off the hot tank drain stopper at the bottom of machine. When drain out all the water,
put the stopper in place. The cleaning process of hot water tank finished. Please clean the
unit with soft cloth dipped in warm water or neutral detergent. To clean the display panel
and decorative panel, please use soft dry cloth.
Do not use rough detergents, concentrated washing liquid, solvent or anything that may
scratch the machine materials (such as steel wool, steel balls, etc.).
Attention: If it connects with power supply when you cleaning the machine, make sure not
make the back of machine damp.
Note:
If you find there are scales in hot tank, you can put 5% citric acid into tank to clean
the scales. Move machine out of table for around 20cm, hook the dust cover by hand and
pull it out.
Picture 10
9.3.
Clean the Dust Cover
Move machine out of table for around 20cm, hook the dust cover by hand and pull it out. Use
close or brush to clean the dust on it, then put it back.
Note:
To clean the dust cover regularly can help machine to keep good ventilation
performance, making sure each functional modules can work efficiently.
9.4.
Clean Machine
Please clean the unit with soft cloth dipped in warm water or neutral detergent. To clean the
display panel and decorative panel, please use soft dry cloth. Do not use rough detergents,
concentrated washing liquid, solvent or anything that may scratch the machine materials (such
as steel wool, steel balls, etc.).
Attention:
If it connects with power supply when you cleaning the machine, make sure not
make the back of machine damp.
