Lonking CDM307 Скачать руководство пользователя страница 3

Страница: 3 / 81

Dear user:

Thank you for selecting LONKING skid steer loader!

This

Operation Manual

briefly introduces the safety and maintenance regulations of CDM308 ( include

CDM307 and CDM312 ) skid steer loader for the use and reference of machine operators, maintainers

and technical managers.

Operation Manual

is a guide for proper use and maintenance of this machine, therefore please carefully

read this manual before operating this machine.

Many faults are caused as a result of operator’s lack of reading this manual carefully and other human

reasons; a high level of safety awareness and good maintenance of the machine makes a safe, efficient

operation, and thus brings you more benefits. Therefore, please read and understand safety instructions

and strictly follow the related instructions before operating this machine. Incorrect operation, lubrication,

maintenance and repair of the machine are dangerous and may cause accident of human casualties.

We will continue to strive to improve product synthesis performance by ameliorating product design to

make the machine work more efficiently. We reserve the right to make changes to machine parameters

and configurations, any changes of contents about this manual will not be precaution, and any technical

parameters involved in this manual will not be taken as a check or test basis.

In order to better service you and improve product and service quality, if you find any problem or have a

good solution for the problem during the use of this machine and

Operation Manual

, please correspond

with us timely.

This manual is the third version.

Best wishes for your business!

LONKING Holdings Limited

Apr, 2013

Содержание CDM307


















































































Результаты поиска

Содержание CDM307

Отзывы:

Похожие инструкции для CDM307

Бренды по названию

Популярные бренды

Lonking CDM307, Руководство по эксплуатации

Результаты поиска

Содержание CDM307

Отзывы:

Похожие инструкции для CDM307

Бренды по названию

Популярные бренды