Longvast Granvista Plus GVP-221, Руководство пользователя

Страница: 10 / 65

9
Example about how to know the user’s PC and network information from command prompt. Simply type in
“
ipconfig
” in the Command Prompt screen, press Enter, and you will see the related information which
shows you the PC’s IP, Subnet Mask, Default Gateway, etc.
The first three numbers of the network camera’s IP must be same as the first three numbers of the
PC’s IP address, otherwise the screen can not be displayed properly on the WWW browser. In the
above example the PC’s IP address is 192.168.1.6., and we have set the camera’s IP to be 192.168.1.8.
Open the Web-based UI of the Selected camera
1. To access the Web-based user interface of the selected unit by right-clicking and selecting “Open web”
from the slide-bar.
2. If the device has been configured correctly, the default Web browser, the Internet Explorer, will open to
the home page of the selected device.