Longshine POS GT-150 Series, Руководство пользователя

Страница: 14 / 40

Introduction
8
1.4 Connector Panels
The connector panel is located at the bottom of the main unit base. To clearly see the panel you
must open the base cover.
Chart of the connector panel:
I/O Port Connector Type Description
PS/2
Mouse PS/2 Mouse
Connector Use this port for an external mouse.
PS/2
Keyboard PS/2 Keyboard
Connector Use this port for an external keyboard.
COM 1
COM 2
COM 3
COM 4 DSUB Connector The serial ports COM1/COM2/ COM3/ COM4 can be
used to connect serial devices such as a mouse or a
fax/modem.
LPT DSUB Connector The parallel port LPT can be used to connect parallel
devices, such as a printer.
RJ12 RJ12 Cable The port is used to hook this device to a modem.
VGA VGA Connector The VGA port is for the external LCD or CRT monitor.
RJ45 10/100Mbps
Ethernet
The LAN port is used to hook this device to a local area
network.
USB USB The USB (Universal Serial Bus) port can be used to
connect USB devices.
USB34 USB The USB (Universal Serial Bus) port can be used to
connect USB devices.
Audio Speaker Cable After install onboard audio driver, you may connect
speaker to Lin Out jack, microphone to Mic In jack.
Power
Connector ATX_12V power
connector The ATX_12V power connector mainly supplies power to
the CPU. Caution! If the ATX_12V power connector is
not connected, the system will not start.