Longshine LCS-883R-SW8GD, Руководство пользователя

Страница: 11 / 26

3. Installing and Using 10/100/1000Mbps Gigabit Switch
3.1 Installing The 10/100/1000Mbps Gigabit Switch
The switch does not require software configuration. Users can immediately use
most of the features simply by attaching the cables and turning the power on.
3.1.1 Desktop Installation
For desktop installation, the switch needs to put on a clean, flat desk or table
close to a power outlet. Plug in all network cables and the power cord, then the
system is ready.
Before installing the switch, you must ensure:
1. It is accessible and cables can be connected easily
2. Cabling is away from:
＊
Sources of electrical noise such as radios, transmitters and broadband
amplifiers
＊
Power lines and fluorescent lighting fixtures.
3. Keep water or moisture off
4. Airflow around the unit and through the vents in the side of the case is great
for heat radiation (company recommend that you provide a minimum of 25
mm clearance)
To prolong the operational life of your units:
1. Never stack unit more than eight sets high if freestanding
2. Do not place objects on top of any unit or stack
3. Do not obstruct any vents at the sides of the case
10