Longshine LCS-883R-SW8GD, Руководство пользователя

Страница: 16 / 26

Main menu
After system test program, Press [Ctrl] + [S] to start the first setting screen as shown
as below:
This powerful 8-port Gigabit Smart Switch provides the following management function:
Function Statement Control Key
<1> Port Status It is a summary of port status and configuration [1]
<2> Port Config You could check operating status of all ports and
setup the port configuration, like speed, duplex
mode, flow control and Port Priority.
[2]
<3> Mirror Config When a port is mirroring, every packet could be
monitored
[3]
<4> VLAN Config Supports up to 7 groups port-base VLAN [4]
<5> Trunk Config Review and setup the port trunk function. It
supports up to 2 port-trunk groups
[5]
<6> Misc Config Including IP priority map, Aging time. [6]
<Ctrl_W> Write Config Save the current settings [Ctrl+W]
<Ctrl_D> Set Default Reset to initial state [Ctrl+D]
<Ctrl_Q> Exit Save and exit [Ctrl+Q]
<TAB> Next Item Move to next setting [Tab]
<BACKSPACE> Back Return to previous item [Backspace]
<Enter> Toggle Adjust the value of the item [Enter]
Remark:
15
Before you disconnect the management console, remember to press the control key
[Ctrl]+[Q], or the settings you revised will not apply.