LRF-3000H Handheld Ultrasonic Flowmeter
- 25 -
Menu
2
4
Transducer Mounting
Four mounting methods are available:
0. V (sound wave bounces 2 times)
1. Z (sound wave bounces once. The most
commonly use method)
2. N (small pipe, sound wave bounces 3 times.)
Menu
2
5
Transducer Spacing
(This value is Calculated by the Flowmeter)
The operator must mount the transducer
according to the transducer spacing displayed (be
sure that the transducer spacing is measured
precisely during installation). The system will
display the data automatically after the pipe
parameter has been entered.
Menu
2
6
Initial Parameter Setups and Save
Load and save the parameters. 18 different sets of
setup conditions/groups are available to load and
save by three methods (i.e.-you can load and save
18 different applications):
0.
Entry to Save
1.
Entry to Load
2.
To Browse
Select “Entry to Save”, press
Enter
. An ID code and
the original parameters are displayed in the
window. Press UP or DOWN ARROW to move the
ID code, then press the
Enter
key again to save the
current parameter in the current ID file.
When selecting “Entry to Load”, press ENT, and
the system will read and calculate the parameters
automatically and display the transducer
mounting spacing in Window M25.
Menu
2
7
Cross-Sectional Area
Display the cross-sectional area inside the pipe.
Menu
22
Fluid
Viscosity
1.0038
cST
14
:
56
:
09
Q
=
97
R
Menu
24
Transducer Mounting
0.
V
14
:
56
:
20
Q
=
97
R
Menu
25
Transducer
Spacing
514.603mm
14
:
56
:
40
Q
=
97
R
Menu
26
Parameters Setups
Entry
to SAVE
14
:
57
:
00
Q
=
97
R
Menu
27
Cross
-
sectional
Area
271547 mm2
14
:
57
:
20
Q
=
97
R
