21
www.longer3d.com
6.10 Slice
①
②
③
④
Thickness
: the current layer thickness of printing model.
Thickness Setting
: set the layer thickness, the suggested value is
between 20 to 100μm.
Advanced Setting
: set the layer number of base plate to strong the
adhesion between model and building platform, the height of base is
about
0.3mm
, so the layer number is set to
6 when the layer thickness
is 50μm
; and sets to 3 layers when layer thickness is 100μm.
Start
: slice the model with the setting layer thickness, “
Sliced
” will
show behind the Thickness icon when slice is completed, otherwise is
shown “not slice”.
Slicing Image Preview
: preview the image of sliced model.
Click
slice
icon, adjust the layer thickness to suitable value by clicking
left and right arrow (the value is 50μm by default), such as 50μm, click
start
icon to slice the model by setting layer-thickness. Every layer
