Operation and Maintenance Instruction LNK-OM-NS-RGW /V1.0
7
1) Align the screw hole on the side of the main light body with the position at mounting base
which is about 3cm in a counter clockwise direction against the screw hole on the side of the
mounting base, and then insert the main light body into the mounting base stably;
2) After the main light is firmly inserted, screw the main light body towards clockwise direction;
(after secured, the screw holes on the base and the side of the main body should be aligned.)
3) After above steps, lock the M4 hexagon socket screw by the side. the installation should
complete.
SECTION
Ⅳ
S
TORAGE
R
EQUIREMENTS
4.1 Storage Environment Requirements
LNK-NS-RGW Navigation safety light should be stored in a clean, non-pollution and liquid-free
environment.
SECTION
Ⅴ
S
ERVICE
L
IFE
&
S
AFETY
5.1 Product Life
With proper use follow the instructions. The warranty of LNK-NS-RGW Navigation safety light is
three years from the date of manufacture.
5.2 Safety
The wire connection of LNK-NS-RGW Navigation safety light shall be operated by a professional
electrician, and per operation should follow the requirement of Section 3.2.5.
SECTION
Ⅵ
I
NSPECTION
6.1 Inspection Time
LNK-NS-RGW Navigation safety light is a daily navigation signal device to indicate the status of
the vessel. It is necessary to observe whether the product works normally or not during daily
using.
Figure 3-7
1
）
3
）
2
）
About 3cm in a counter
clockwise direction against
the screw hole on base
When compete, the direction
indicate spot should towards
front of the vessel.
