Operation and Maintenance Instruction LNK-OM-NS-RGW /V1.0
8
6.2 inspection method
The inspection methods of products are as follows:
1) Turn on the product through the control panel of vessel, and visually check whether the
product works normally and showing correct light signal;
2) Visually check whether the appearance of the product is normal and whether the lampshade
is clean and transparent.
SECTION
Ⅶ
M
AINTENANCE
7.1 The user only needs to confirm whether the product is normal when using LNK-NS-RGW
Navigation safety light, besides that no other maintenance is required usually.
7.2 When cleaning the product, just use ordinary damp cloth. Do not use alcohol, thinner or other
corrosive reagents to wipe the product
7.3 when the product is not functioning right, the user should first check whether the wire
connection of the product input wire and the extended wire joint is okay.
SECTION
Ⅷ
R
EPAIR
A
ND
D
ISPOSAL
I
NSTRUCTIONS
8.1 Repair Instructions
1) If input wire connection of the product goes wrong, the repairing work should process by a
professional electrician.
2) Except for the problem of wire connection, the product`s main light body cannot be
disassembled or repaired. When the lamp does not work properly during the warranty period,
the user should contact the dealer or manufacturer for assistance. If the product fails after the
warranty period, the user should replace it with a new one.
8.2 Disposal Instructions
Dispose of damaged or defective lights in accordance with the local regulations. This process
should be done through an approved environment disposal agent.
SECTION
Ⅸ
P
ACKAGING
I
NFORMATION
9.1 Each product is pack with single unit box.
9.2 Standard outer carton package: 50 units/carton. Dimension: 630 * 280 * 475mm
Volume 0.08 m
³
，
Gross weight : 13.5 kgs.
SECTION
Ⅹ
M
ANUFACTURER
I
NFORMATION
Company name: XIAMEN LONAKO INDUSTRY & TRADE CO., LTD.
