Pull the film at a picture length. To do that open the window cover plate
and rotate the film rewinding knob (18) till the following figure appears in
the window, then close the cover plate.
Unloading the Camera
After the last exposure has been made rewind the film protective paper
onto the take-up spool. Sometimes when the winding is almost completed
the turning of the knob is detained due to the paper jammed in the supply
spool slit. However this should not prevent the daylight unloading of the
camera.
Open the camera back. Fully pull off the film rewinding knob and take-up
spool head. Carefully take out the spool with the exposed film, seal the
protective paper end and keep the film until it is developed.
Take the spool out of supply spool receptacle and insert into that of the
take-up spool. Further, slightly turning film rewinding knob, press it and the
head of the take-up spool spindle up to the stop.
Close the camera back.
Put cover on the camera lenses. For convenience purposes, adjust their
mounts at the same level.
MAINTENANCE
Handle the camera with care.
Contaminated lenses deteriorate pictures sharpness, so it is necessary to
keep lenses always clean. The objective lenses could be wiped from the
outside only using a clean cambric or linen cloth or cotton wool, on having
breathed on them.
Never dismount the camera.
Never wipe the plastic parts of the camera and the field lens with alcohol,
acetone and other active solvents.
TECHNICAL DATA
Film accepted
120 - 61.5 mm
Picture size
6 * 6 and 4.5 * 6 cm
Содержание Lubitel 166
Страница 7: ......
