LOKITHOR JA301, Руководство пользователя

Страница: 24 / 39

24
7. How to use the 5V USB-A port to charge your mobile phone
7.1 You will need the following: USB To USB-C cable and a mobile phone (if the mobile phone supports 9V2A of QC
protocol, it can support 9V2A fast charge)
7.2 When the "USB" icon on the screen light up, plug the USB plug/A Port to the jump starter and the C port into your
mobile device;
6. How to charge your jump starter
6.1 You will need the following: USB power adapter(5V output USB power adapter or 9V2A USB power adapter if QC
protocol supported) and a USB To Type-C cable.
6.3 In the case of running out of power or low power, please charge the product in time to prevent battery
under-voltage. Long-term no power status of battery may cause the product to fail to charge..
5.How to use LED light?
①
Long press the "Light" button for one second, the LED lights up
②
Short press the "Light" button in order to switch the modes of
ON, Strobe, SOS and OFF;
③
Long press the "Light" button for two seconds to turn off the
LED light forcefully;
6.2 Plug the USB plug/A Port into the power adapter and the C port into the jump starter‘ s charging port. At this point,
the battery indicator and the "In" icon on the screen will turn on, indicating that the product is charging;