LOKITHOR JA301, Руководство пользователя

Страница: 21 / 39

21
1. How to power up the jump starter?
Operating Procedure
Press the "Light"or "Power" button;
2.1.1 Connect the jump starter clamps with the EC8 connector to the jump starter;
2.1.2 Connect the red (+) clamp to the positive (+) terminal on the vehicle battery and the black (-) clamp to
the negative (-) terminal on the vehicle battery, and make sure that the connections are good;
2.1.3 Press the "Light"or "Power" button to power on the product. The green light on the screen will light up
and flash if there are no issues. At this time, you’ll be able to start your vehicle.
2.1.4 If the vehicle starts successfully, the jump starter will automatically disable the power output.
2.1.5 In most cases, the vehicle will be able to start immediately after the jump starter has been connected.
Some vehicles may need to be connected to the jump starter for 30~120 seconds (the product will charge the
car battery at this time) to continue the operation. If the vehicle does not start immediately, Please wait 20-30
seconds before each attempt. Do not attempt more than five times within 15minutes.
2.1.6 Please remove the jump-start clamps from the car battery instantly after you finished the starting. Pressing
on the “Power” button for 2 seconds to shut down jump starter. If there are no operations for 60 seconds, the
product will automatically shut down;
2. How to use the jump-start function?
2.1 Method one: Normal start