5.
Holding down the right knob, and release it when the display shows
as following figure.
6.
Press the right knob or
button to save the configuration.
After configuration, the machine can begin to work.
Configured JOB
(JOB
＞
0)
1.
Select the configured JOB number by
and
of the front
panel of the wire feeder.
If you need to view the parameter values in JOB or create a new
JOB, see the above "
Unconfigured JOB
"
operation steps.
2.
Shortly press the right knob to confirm the selection.
After configuration, the machine can begin to work
55
