F014
Inductance
-50 -+50
Set the inductance modification
When the welding mode (F02) is "1", "2", "3"
or "4", it is effective.
F015
BBT
-10 -+10
Set the BBT modification
When the welding mode (F02) is "1", "2", "3"
or "4", it is effective.
F016
Lift MIG
On/Off
"On" means the function is turned on.
"Off" means the function is off.
When the welding mode (F02) is "3" or "4", it
is effective.
F017
Pulse
frequency
0.5-4.0
When the welding mode (F02) is "4", it is
effective.
F018
Balance
20% -80%
When the welding mode (F02) is "4", it is
effective.
F019
Level
30% -90%
When the welding mode (F02) is "4", it is
effective.
F020
Welding time
0.1-25 s
Only for spot cycle
F021
Pre-gas time
0.1-5.0 s
Set the pre-gas time
When the welding mode (F02) is "1", "2", "3"
or "4", it is effective.
F022
Hot start
0 -10
When the welding mode (F02) is "3" or "4", it
is effective.
F050
JOB number
1-50
Selecting JOB to modify existing JOB, if you
choose the display will blink, if you want to
do a new JOB brought it to the last
available, the only one that doesn't blink.
The instructions for parameters up-slope time, start current, arc start time, down-slope
time, stop current, arc stop time, pre-gas time are shown in the following figure.
35
