LOKERMANN GRAND CUT 60, Руководство пользователя

Страница: 12 / 18

Note
:
- The alarm lamp on when cutting, it is needed to loose the switch of the torch
until the alarm release, then press on the switch to start cutting again.
- In the automatic gas test and examine, press on the cutting torch, there will no
reflection.
- After a long usage, the surface of the electrode and nozzle will have Oxidation
reaction. Please replace the electrode and nozzle, For The alarm lamp will on
when install the shield cup, and stop working,
3.3
Operation
environment
▲ Height above sea level ≤1000 M
▲ Operation temperature range -10
～
+40°C
▲ Air relative humidity is below 90 %( 20°C)
▲ Preferable site the machine some angles above the floor level, the maximum
angle does not exceed 15
℃
.
▲ Protect the machine against heavy rain and against direct sunshine.
▲ The content of dust, acid, corrosive gas in the surrounding air or substance cannot
exceed normal standard.
▲ Take care that there is sufficient ventilation during welding. There must be at least
Cutting Operation
30cm free distance between the machine and wall.