P a g e
|
8
Logmar Camera Solutions IVS
Wi
-
Fi:
The camera is designed with an 802.11b/g enabled Wi-Fi hotspot without any security applied, making it
easier to connect to mobile phones, PC’s or Logmar Wi-Fi accessories.
The Wi-Fi is certified for both FCC, IC, CE, KCC and R&TTE for use in Australia, New Zealand, Korea,
Europe, USA, Canada and Taiwan.
NOTICE
You should always have the supplied Wi-Fi antenna connected on the camera when the
camera is turned on. Using the camera without the antenna will violate the regulation
laws and one must only use an antenna with zero gain such as the original type.
Accessory holder:
The accessory holder is a standard camera mount that hold microphones, flashes,
lights etc.
Tripot mount:
The camera features a standard tripod mount underneath on its mount plate.
Loading gauge:
The loading gauge tool helps to determine the
correct Latham loop length by inserting it into the
cassette and dragging the film over it.
(See loading
instructions section)
SERVICE
The lens mount is a mechanical part that exhibits wear-out and shift from regular use
(lens exchange)
.
The mount can withstand at least 25 exchanges before re-collimation
is required
.
