logitrans WSP 2200, Руководство пользователя

Страница: 16 / 24

8.4 Operating of the indicator
Zero setting
If the scale does not show 0.0 with no load, the display indication will be set to zero by
pressing the
button. This is up to 2% of the Max capacity possible.
Tare
Should the scale only display the weight of contents of a container, place an empty
container on the scale and press the button. Now the displays indicate 0.0. NET
symbol appears on the display. After filling the contents only the ingredients are
displayed.

Multitare is possible.

Partial Tara removal is possible.
Clear Tare value:
Remove all weight from the platform and press the button. On the
display the symbol ▼ GROSS (gross) appears.
Pretare
Press the key whom there is no weight on the scale. Enter the weight using the
cursor function and confirm with the Enter key:
⇒

(0~9)
⇒

(9~0)
⇒

⇒

⇒

Function
Switching between the operating mode:
Weighing, piece counting reference mode, target weight mode, addition mode, hold
mode (see section 9).
Gross/Net switching
To indicate the combined weight of the container and the content, press the button.
Now the symbol
▼ GROSS
(gross) is displayed and the total weight is displayed. Press
the button again and the weight of the contents and the NET symbol appears on the
display again.
UNIT
Option. Not in use.
Printout/Dataoutput
Press this key to send out the data on the interface (option) connector or to print it out.
The weight value will be accumulated to the addition memory. The symbol ▼ M + is
shown in the display.
16