Harmony 880
User Manual
v. 1.1
page 6
Using Your Harmony Remote
This section provides you with information to that will help you use
Using the Glow Button
Press the
Glow
button to light up or turn off the screen (LCD) backlight. To determine the length of time
the backlight stays on:
1. Click
My Remote Preferences
on your Harmony home page.
2. Click
Settings
.
Recharging the Battery
Place your remote in the base station to charge. While the remote’s battery is charging:
•
The screen (LCD) and its backlight, and the keypad backlight remain on.
Note:
Press the GLOW button to turn the backlight off.
•
The battery level icon in the status bar flashes when the battery is still charging or will display a
full battery level when charging is complete.
When the battery is low, the screen (LCD) will flash a message to remind you to charge the
battery.
Removing the Remote From the Base Station
Note:
Whenever you pick up the remote from the base station, or replace it in the station, you will
hear a beep.
When you pick up the remote slightly tilted, the screen (LCD) will automatically turn on and the keypad
light up. To enable/disable these features:
1. Click
My Remote Preferences
on your Harmony home page.
2. Click
Settings
.
Back to Top
