Installation Guide
Connecting Logipix cameras to the Box-mount LNVR
Connect the CAT5 Ethernet cable of the Logipix camera to one of the 16 LPoE
ports of the LNVR! The draws below show the exact place of the ports. When
the network topology do not allow direct connection between the camera and
the LNVR, the Logipix camera can be connected to the company network, and
its router can be connected to the Gigabit LAN connector of the LNVR.
If the camera is connected to a router the LAN cable of the router must be
connected to the IP Camera Gbit LAN port of the Box-mount LNVR! The exact
port is indicated on the picture below.
LED States
A Pwr LED is related to each LPoE port. It lights up in green if the camera gets
power from the LPoE router of the LNVR. The Pwr LED can be found above
each LPoE port. If the connection has realized between the Logipix camera and
the LNVR, an indicator LED, called Link lights up in green. The Link LED can be
found above each port.
17/17
