3
Make sure your plumbing is suitable to install
with the new dishwasher. If in doubt contact a
qualified plumber.
The water pressure coming from the water
mains supply need to be at a minimum of 0.4
and to
maximum of 10 bars.
max 100 cm
min 40 cm
min 4cm
Fit the drainage hose of your machine
to the drainage pipe without bending.
washing process.
Secure your hose firmly to the waste
pipe to avoid it coming off during the
drainage system.
The waste pipe must only be connected
into the foul drains and not surface water
First connect water inlet hose to your
dishwasher as . Ensure black rubber seal is
in place.
Then connect the straight end to your water
mains supply as . Ensure black rubber seal is
in place.
Turn on the tap and check for leakages after
connecting the hose.
Please ensure the tap is turned off when the
machine is not used.
If you only have cold water mains
from most DIY stores.
:
The Y adaptor can be used to
provide you with the additional
cold water feed you need for the
Y adaptor is available. dishwasher
The hose should be placed between
40 cm and 100 cm from the floor level
and must not be extended otherwise the
machine may not be able too expel the
waste water properly.
Содержание LF674SSN
Страница 1: ...LF674WN SSN GB...
