Logik LDABCR11, Инструкция по эксплуатации

Страница: 9 / 24

9
Basic Operation
Powering ON/OFF
• Press the STANDBY button to switch the unit on.
• Press the STANDBY button again to switch the unit back to standby mode.
• Disconnect the mains adapter from the mains socket if you want to switch the
unit off completely.
Selecting Modes
Press the DAB/FM button repeatedly to switch between modes (DAB or FM).
Adjusting the Volume
Adjust the volume to the desired level by pressing the VOL+/– buttons.
Mute Function
Press the SNOOZE/MUTE button to temporarily stop the speakers emitting sound.
The display will show “MUTE” and flash. To cancel mute and restore the sound, press
the SNOOZE/MUTE button again or the VOL +/– buttons, “MUTE” will disappear from
the display.
Setting the Time
The clock can only set and be updated if you can receive DAB signals in your location.
In order for the clock to synchronise to the current local time you must leave it
on one DAB station for a short period of time. If after 3 minutes the clock has not
automatically set itself try repositioning the radio to get a better reception.
If the radio cannot find a DAB frequency to set the clock. You can use the FM mode
(some FM stations also transmit time and date information).
1. Switch to FM mode by pressing the DAB/FM button.
2. Search for a station by pressing the SCAN button.
3. Press the DISPLAY button repeatedly to explore the time & date display.
4. If the FM station is transmitting time it will set itself automatically. Please be aware
that not all FM stations transmit the time. If the time does not set after 3 minutes
then press the SCAN button to find another station. Repeat until the time is set.
LDABCR11_IB_110705_Zell.indd 9 05/07/2011 10:20 AM