Logik LBOOMPK11, Инструкция по эксплуатации

Страница: 14 / 20

Hints and Tips
If a problem does occur, it may often be due to something very minor. The following table
contains various tips.
Problem Cause / Solution
No sound / power • Volume not adjusted. Adjust the volume.
• Mains cable not securely connected. Connect the mains cable
properly.
• Batteries dead/incorrectly inserted. Insert (fresh) batteries correctly.
• CD contains non-audio files. Press the buttons once or more
to skip to a CD audio track, instead of the data file.
Display does not
function properly
/ No reaction to
operation of any of
the controls
• Electrostatic discharge. Switch off and unplug the unit. Reconnect
after a few seconds.
• No CD inserted. Insert a CD.
• CD badly scratched or dirty. Replace or clean the CD, see
Maintenance.
• Laser lens steamed up. Wait until lens has cleared.
• CD-R / CD-RW is blank or not finalized. Use a finalized CD-R / CD-RW
or a suitable CD Audio disc only.
• Make sure the CD is not encoded with Copyright protection
technologies, as some do not conform to the Compact Disc
standard.
The CD skips tracks • CD damaged or dirty. Replace or clean CD.
• Program is active. Quit program mode.
• A badly scratched or dirty CD may result in improper operation.
Poor Cassette
Sound Quality
• Dust or dirt on the heads, etc. Clean cassette compartment parts,
see Maintenance.
• Use of incompatible cassette types (METAL or CHROME). Only use
NORMAL (IECI) for recording.
Recording does not
work
• Cassette tab(s) may be broken. Apply adhesive tape over the
missing tab space.
14
LCCSTR10_LBOOMPK11_IB_final110518.indd 14 18/05/2011 2:41 PM