Logik L32DLCD11, Инструкция по эксплуатации

Страница: 16 / 72

GB
16
Connec
tions
.Connecting.a.Coaxial.Audio.Receiver
For better sound quality, you may want to play the audio through your multi-channel audio receiver.
1..
Use an audio cable to connect the TV’s COAXIAL
output socket to an external audio receiver’s
audio coaxial input socket.
2.. Plug the connected devices into the mains socket
before switching on the
POWER.ON/OFF
switch
which is located at the rear of the TV next to the
mains cable.
3.. Press the . /.I button at the front right side of the
TV or the
.
button on the remote control to turn on
your TV.
4.. Press the .SOURCE button at the front right side of
the TV or the
INPUT
button on the remote control
to display the Source List. Use the buttons to
select any desired input source and then press the OK
button to confirm.
.Connecting.Earphones
Connect your earphones to the TV’s socket.
Before putting on earphones, turn the volume down
then put the earphones on and slowly increase the
volume until you reach a comfortable listening level.
Rear View of TV
HDMI1 HDMI3
COMPONENT
AV1 IN
HDMI2
POWER
ON/OFF
AC
USB
OUTPUT 5V 500mA
Earphones Cable
(not included)
The TV’s volume control will have no
effect. You may control the audio level via
the Audio Receiver.
Listening to loud sounds for prolonged
periods of time may permanently damage
your hearing.
Rear View of TV
HDMI1 HDMI3
COMPONENT
AV1 IN
HDMI2
POWER
ON/OFF
AC
USB
OUTPUT 5V 500mA
Audio Cable
(not included)
Audio Receiver
L32DLCD11_IB_110607.indd 16 11年6月7日 下午3:13