Logik L2HDVD17, Инструкция по эксплуатации

Страница: 23 / 32

23
Customising the Audio Settings
1. Press the SETUP button to display the
setup menu.
2. Press the button to select ANALOG
AUDIO SETUP PAGE.
3. Press the button to select the
following options and then press the
button to change the setting. Press
button on the unit or the remote control,
or ENTER on the remote control to confirm.
DIGITAL OUTPUT
Select the SPDIF Output.
• SPDIF Off
Turns off the SPDIF output.
• SPDIF/RAW
If you have connected your DIGITAL AUDIO OUT to a
multi-channel decoder/receiver.
• SPDIF/PCM
Only if your receiver is not capable of decoding multi-
channel audio.
DOWNMIX
Allows you to set the stereo analogue output of your DVD
player.
• LT/RT
Select this option if your DVD player is connected to a
Dolby decoder.
• STEREO
Select this option to change channel output to stereo
which delivers sound from only the two front speakers.
DOLBY DIGITAL • DUAL MONO
If your amplifier / decoder has Dolby Digital output, you
may select STEREO, L – MONO, R – MONO, or MIX MONO
mode for your amplifier decoder.
• DYNAMIC
Dynamic range compression.
4. Press the SETUP button to exit the menu.
----
----
-
----
----
FULL
OFF
-
-
LT/RT
STEREO
SPDIF/OFF
SPDIF/RAW
SPDIF/PCM
STR
L-MONO
R-MONO
MIX-MONO
DUAL MONO STR
DYNAMIC
- - ANALOG AUDIO SETUP PAGE - -
DIGITAL OUTPUT
DOWNMIX
DOLBY DIGITAL
STR
GOTO SPEAKER SETUP PAGE
AUTO STANDBY
• Select 3 HOURS or 4 HOURS to set the idle length.
While idling, a pop up warning window will
display for 10 seconds before the unit turns
itself off. Press any button to extend the time.
• Select OFF to turn off the auto standby function.
4. Press the SETUP button to exit the menu.
L2HDVD17_IB_Final171012V01.indd 23 17/10/2017 9:41 AM