TYPES OF OPERATIONS
Logicube ZX-
Tower™ User’s Manual
32
There are two sets of passwords that can be entered on the ZX-
T.
File Deletion Password –
A password can be set as an
extra layer of protection when deleting log files. If this
password is set, ZX-T will prompt for the password
before any log files can be deleted.
Config Lock –
The
ZX-T can be configured to lock out
any configuration changes. When this is enabled,
changes to the different types of operations cannot be
made without entering the correct key or password.
Different types of operations can still be started.
For example, when the ZX-T is locked, and it is
configured for Drive to Image Imaging mode, the user
will be unable to change this mode to Drive to Drive or
File to File, but can start the Drive to Image task.
Tap
Password
or
Key
to enter a log file deletion password or a
config lock key. The following screen will appear.
Tap the
Enable
icon to enter a password or key. The available
characters are 0 through 9 and A through F.
5.0.6.2.1 Additional information for
Config Lock
Tap the
Auto Lock
icon to set the time to
automatically lock the configuration and require
a password. By default, this is set to 1 minute.
A shortcut (and indicator) to the
config lock
can
always be seen on the ZX-T’s screen. It is
located on the top-right of the screen, next to
the ZX-T logo.
While in a locked state, the following operations
will be affected as follows:
Wipe –
A wipe task can be started, but
no settings can be changed.
Additionally, no new task can be added,
and no task can be deleted without the
unlock key.
Task Macro –
A task macro can be
started, but no settings can be changed.
Additionally, no new macro can be set
or edited without the unlock key.
Logs –
Since there are no settings or
configurations for this operation, it is
not affected by Config Lock.
Содержание ZX-Tower
Страница 11: ......
