Logicube ZX-Tower, Руководство пользователя

Страница: 26 / 60

Logicube ZX-
Tower™ User’s Manual
19
4: WIPE
4.0 WIPE
The Wipe operation allows the user to erase and/or wipe one or more drives.
There are two main settings:
Secure Erase and Wipe Patterns .
Secure Erase – Sends a command to the drive instructing it to perform a secure erase
based on the drive manufacturer’s specifications for the secure erase command.
Wipe Patterns – Allows the user to set a specific pattern to use for wiping the drive. The
number of passes is customizable (up to 7 passes) along with the type of data written
for each pass. In addition, a 7-pass DoD wipe can be set with pre-selected pass values.
There are three selections when performing a wipe: Target , Settings , and Job Info .
4.0.1 Target
Tap this icon to choose a drive to erase and/or wipe.
A screen will appear, allowing the selection of one or more Target drives. Tap
the drive(s) to be erased or wiped (The drive status will change to
Selected )
then tap OK .
4.0.2 Settings
Tap this icon to choose a drive to set the wipe settings. The
Wipe Settings screen will appear.
There are two sections in the
Settings screen:
Secure Erase
Wipe Patterns
The ZX-T will perform each of the settings sequentially. For
example, if Secure Erase is set to ON, and a Wipe Pattern mode is
specified, the ZX-T will first secure erase the drive, then wipe the
drive according to the Wipe Pattern specified.