Logicube ZCLONE, Руководство пользователя

Страница: 15 / 56

GETTING STARTED
Logicube ZClone™ User’s Manual 9
Buttons
There are three buttons on the front panel.
•
Reset – This button is used to reset or reboot the ZClone.
•
Mute –
This button, when pressed, stops the buzzer from the optional
light tower.
•
Power – This button is used to turn the ZClone on and off.
Light Tower
The ZClone is compatible with an optional light tower that may be
purchased from Logicube. The light tower has three lights and a speaker to
allow visual and audible notification of the progress of tasks performed.
The GREEN light on the light tower indicates a successful task completed.
The AMBER light is on when there is activity on the ZClone.
The RED light will come on if a problem is encountered during any task. If
this occurs, check the screen for an error message and instructions on what
to do next.
Buzzer
In addition to the indicator lights, the light tower also has an
audible buzzer to alert the operator of the following
conditions:
The buzzer will sound when the ZClone successfully
completes a task or if a problem is encountered during any
task.
NOTE: The buzzer will be off by default and can be enabled
or disabled via the CLI (Command Line Interface). The CLI is
further explained in Chapter 7: Remote Operation and
Chapter 8: Command Line Interface Menus.
Installing and Removing the Light Tower
The light tower is attached to the back of the ZClone and
can be removed if desired. This will not affect the
performance of the unit.