TYPES OF OPERATIONS
Logicube SCSI-
NG User’s Manual
46
The unit will boot with the
profile that has an asterisk
(*) next to the name.
The Profiles tab allows users to create, save, and load different profiles with different
configurations. When a profile is loaded using the
Load
icon, the unit will load that configuration
during its boot process.
For example, if the user wants the unit to always boot up with the default Clone mode of
Image
to Drive
:
1.
Turn the unit off then back on. This will reset all settings to the loaded profile. This is an
important step to help ensure only the changes desired will be the changes saved.
2.
Go to the
Clone
screen and set the
Mode
to ‘Image to Drive’.
3.
In the
System Settings
, go to
Profiles
and tap the
New
icon.
4.
Type a name for this profile. For example, ImageToDrive and tap the
OK
icon. The profile
name should appear on the screen.
5.
Tap the newly saved profile and tap
Save
. A confirmation screen will appear.
6.
Tap the
Yes
icon to save the profile.
7.
Make sure the profile to be loaded (during the boot process) is highlighted (for example
ImageToDrive.DB) and tap the
Load
icon. A confirmation screen will appear.
8.
The next time the unit is turned on it will load ImageToDrive profile.
When loading a profile, the it may
take several seconds to completely
load the different configurations.
To delete a profile, highlight the profile to be deleted then tap the delete icon. A confirmation
screen will appear. Tap the
Yes
icon to delete the selected profile.
Содержание SCSI-NG
Страница 12: ......
