Notes for batteries:
To avoid any damage caused by leakage or corroding of the batteries, please pay
attention to the following notes:
·
Pay attention to the correct polarity when putting the batteries into the battery
box.
·
Never use old and new batteries or batteries of different types together.
·
Do not charge arid batteries.
·
If you intend to not use the Remote-Control for a longer time, please remove
both batteries. If a battery leaks, clean the battery box and replace all
batteries.
Installation Receiver and Drives
Ø
Plug in the receiver and the drives at the bed-control-system. At last plug in
the Standby-Circuit at the power outlet.
8 pin DIN-sockets for
Drive 2
Drive 1
Drive 1
Drive 2
Mains-cable with
Standby-Circuit
5 pin DIN-
socket
IR-receiver
power outlet
Bed-Control-System
LIB-CBS-2
Ø
Set-up the right channel.
See Channel Set-up
- 19 -
