Logic LDS120, Руководство оператора

Страница: 11 / 28

9
10. Place the flow lever (D) in the zero position and fill the hopper with the material to be
spread. Ensure that a suitable towing vehicle has been hooked up to the spreader before
filling and that the handbrake has been applied. Do not overfill the hopper; this could
result in fertilizer being spilt or component failure. Ensure there are no foreign bodies in
the hopper e.g. stones or rocks. Wear suitable protective clothing and face protection.
11. Drive to the area requiring the fertiliser, move the drive lever (E) to the IN position (F)
gently moving forward at the same time.
Figure 11.1
6.2 – DISTRIBUTION OF THE FERTILISER/SALT:
The operator must ensure that the towing vehicle travels at a constant speed in order to obtain
an even distribution of material, the operator should use the following overlap technique as
illustrated below:
Spread width is dependable on forward speed and the type of material being spread.
6 Mtr 6 Mtr
1.5 Mtr
Overlap 1.5 Mtr
Overlap
Diagram shows three bout marks and the
desired overlap.
1 2 3