Logic LDS120, Руководство оператора

Страница: 9 / 28

7
1. Check to see if the vehicle transporting the spreader can legally carry its weight (See
manufactures plate on spreader for unladen weights)
2. Ensure the vehicle used to lift and transport the LDS has the necessary lifting and
loading capacity. Follow all vehicle manufactures guidelines for lifting.
2. When lifting the LDS for transporting / delivery purposes always ensure to locate lifting
straps where you see the lifting symbol as shown on the below diagram. Never lift the
spreaders with material in the hopper. And ensure pedestrians are clear from danger
3. Ensure all straps are the same length and comply with EN1492-1
4. All LDS unladen weights are clearly marked on the Manufacture’s plate attached to the
LDS framework. Check the lifting weight complies with the vehicle lifting limits.
LDS120/120DS:
Only lift the LDS from the correct lifting points as shown below.
LDS240 / LDS700:
TRANSPORTING & LIFTING
5
The above decals
should be located on your
LDS
– Ground Drive
Spreader. If any of the above
decals are not located on your
LDS or are damaged in any
way contact Logic for some
replacement decals.