OPERATION
RESET
The reset button is placed on the housing.
To reset, use a sharp point object and press and hold the
RESET
button for 2 seconds.
The reset button is to be activated for the following reasons:
• Initial installation of the unit when all wiring is completed.
• All the function buttons does not operate.
• error symbol on the display.
LISTENING TO RADIO
Band (BD)
Pressing this key repeatedly will cycle between each band as follows: FM1---FM2---FM3---AM1---AM2.
Stereo / Mono (ST)
Press
ST
button to switch between stereo and mono sound for FM radio reception. When reception of an
FM station is weak, listening quality can be improved by switching to mono sound.
Automatic or Manual tuning (SEEK + / SEEK –)
When pressed quickly, these keys operate as MANUAL tuning mode.
When pressed longer than 1 second, these keys operate as AUTOMATIC tuning mode.
‘SCAN’ AUTOMATIC TUNING CONTROL (SCN)
This key operates RADIO SCAN. The operation is similar to normal search but hold each detected station
for 5� seconds.
Auto Seek/Preset scan (A/PS)
�re�et S�an (�S)
- By pressing quickly, the radio plays each preset station for 5� seconds.
Aut� See�� (AS)
- By pressing longer than 1 sec, auto seek is activated. The 6 strongest stations are preset
and stored in the corresponding preset number. When Auto Seek operation is finished, the radio executes
the preset scan.
Storing and Recalling Frequencies
If you press any of the NUMBeR (1-6) you can easily
store up to six broadcast frequencies for later recall
with the touch of a button.
1. Choose a desired BAND.
2. When you find a frequency that you want to store
in memory, press a NUMBeR(1-6) and hold until
the preset number shows and lit in the display.
3. The selected radio station frequency has been
stored in memory. The next time you press the
same NUMBeR (1-6) the radio station frequency
is recalled from memory.
N�te: U�� t� 18 FM / 12 AM �tati�n� �an be �t�red
in the mem�ry.
OPERATIONS COMMON FOR CD/MP3/WMA/VCD/DVD/MP4
-10 Tracks Down / +10 tracks Up
1. Press
-10
button to jump 10 tracks backward starting from currently played track.
2. Press
+10
button to jump 10 tracks forward starting from currently played track.
Specifying particular track
During playback, all track file names under a folder will be displayed on the screen with their corresponding
track number. You can use the navigation keypad on the remote control to access each file.
Ti���:
T� �ele�t tra��� 3, ��re�� 3.
T� �ele�t 13, ��re�� and h�ld 10+ f�ll�w by 3.
T� �ele�t 23, ��re�� and h�ld 10+ (2 time�) f�ll�w by 3.
Preset Memory Station 1-6 Currently Tuned Station
Содержание DM800i
Страница 20: ...P I ...