9
5.1
Current Time (“cLoc”)
ALARM
INIT
TIME
PM
The current time can be changed by pressing the
SEL
key when the
display shows “cLoc”. The current time will be shown and the time
indicator will be illuminated. The PM indicator will only be illuminated if
you’ve chosen the 12 hour time format and the current time is PM! For
example, if the current time is 20:35 (24 hour format) the display will look
like this:
ALARM
INIT
TIME
PM
Change the hours by pressing the
+/HRS
key; the hours will increment
from the current setting up to 23 (or 11pm) and then “wrap-around” to 00
(or 12am). Change the minutes by pressing the
-/MIN
key; the minutes
will increment from the current setting up to 59 and then “wrap-around” to
00. If you change your mind and don’t wish to change the current time,
simply press the
MODE
key; the display will return to the current time
(adjusted for any fast time minutes elapsed while in this editing mode).
Once you are satisfied with the new time press the
SEL
key; the display
will then show “cLoc” again. At this point pressing the
MODE
key will
change the display to the new current time.
