18
5.5 Brightness
(“brit”)
ALARM
INIT
TIME
PM
The display brightness can be changed by pressing the
SEL
key when the
display shows “brit”. The current brightness setting will be shown. “br L”
means low brightness; “br H” means high brightness; “br A” means
automatic brightness (Low from 7:00pm to 6:30am, High from 6:31am to
6:59pm). For example, if the current brightness setting is “high” the
display will look like this:
ALARM
INIT
TIME
PM
Change the brightness setting by pressing either the
+/HRS
key or the
-
/MIN
key. If you change your mind and don’t wish to change the
brightness setting simply press the
MODE
key; the display will return to
the current time (adjusted for any fast time minutes elapsed while in this
editing mode). Once you are satisfied with the new brightness setting press
the
SEL
key; the display will then show “brit” again. The new brightness
setting will be in effect and stored in non-volatile memory as well. At this
point pressing the
MODE
key will change the display to the current time
(adjusted for any fast time minutes elapsed while in this editing mode).
