32
33
1. You may enter or change the offset and gain values for different measurement parameters, while
viewing the current offset and gain values next to the corresponding boxes.
2. Once you have completed your calibrations, press the APPLY button on the SETUP tab.
3. The current offset value will update to show the value that you entered (instead of the default
value). If you want to change the value, you can enter a new value in the box beside the number (as
in step 1). To update the value, again, press APPLY in the SETUP tab.
NOTE: We do not recommend calibration of most values with the exception of Relative Pressure,
which must be correctly calibrated to reflect your distance above sea level to account for
altitude effects.
Once your device is connected, login into your ProWeatherLive account and see your device’s live
weather data on the dashboard.
CALIBRATION
PROWEATHERLIVE (PWL) LIVE DATA
28
6.4.1 CALIBRATION
1.
User can input the offset and/or gain values for different parameters while current offset and
gain values are shown next to their corresponding blank.
2. Once completed, press
Apply
at the bottom of the SETUP page.
The current offset value will show the previous value that you entered, please input the new
value in the blank if any changes needed, the new value will effective once you press
Apply
icon in SETUP page.
NOTE:
Calibration of most parameter is not required, with the exception of Relative Pressure, which
must be calibrated to sea-level to account for altitude effects.
7.
PROWEATHERLIVE (PWL) LIVE DATA & OPERATION
7.1
VIEW LIVE DATA
Login your ProWeatherLive account.
Once your device is connected, your device's live weather data will show on the dashboard
page.
NOTE:
Please press "Help" in the
should you have any query on the PWL operation.
8.
MAINTENANCE
8.1
FIRMWARE UPDATE
The console supports OTA firmware update capability. Its firmware may be updated over the air
anytime (whenever necessary) through any web-browser on a PC/Mac with WI-FI connectivity.
Update function, however, is not available through mobile/smart devices.
Upload
Browse
Firmware version: 1.00
Current firmware
version
Firmware update in ADVANCED page
Press to start upload the firmware
to console
Select the firmware file for update
UPLOAD TO OTHER WEATHER SERVERS
The ProWeatherLive weather server allows data from each weather station to be uploaded to two
(2) other weather servers such as WeatherUnderground, WeatherCloud, PWSWeather, or AWEKAS.
For more information on setting up accounts for these servers, please refer to the HELP menu on
ProWeatherLive.
Follow the steps below to update your device’s Function or Wi-Fi
®
System Firmware
1. Download the latest version of the firmware (Function or Wi-Fi
®
) and save it to your PC. Remember where you
saved the file.
2. Set the console into AP (access point) mode then connect the PC/Mac to the console (refer to Setting Up Wi-Fi
®
Connection).
3. On the SETUP page, press “Advanced” to enter advance setting.
4. Under the firmware upload section, press to locate the firmware file saved on your PC/Mac.
5. Press to start firmware update.
6. The console will restart once the update completes.
NOTES: You cannot update the Function Firmware and Wi-Fi
®
Firmware at the same time. Updates must
be installed one by one.
Make sure the power cable remains connected during the update process.
Make sure your PC’s wireless connection is stable.
Once the update process starts, do not try to do anything else on your PC or on the display console.
29
8.1.1 FIRMWARE UPDATE STEP
1.
Download the latest version firmware to your PC/Mac.
2. Set the console into AP (access point) mode then connect the PC/Mac to the console (refer
to
section 6.1
and
6.2
).
3.
From the SETUP page, press ADVANCED to enter advance setting
4.
Under the firmware upload section, press
Browse
to locate the firmware file saved on
your PC/Mac.
5. Press
Upload
to start firmware update.
The update time is around 5 ~ 10 minutes. While updating, the
progress will be displayed (i.e. 100 is completion).
6. The console will restart once the update is completed.
7. The console will stay in
AP mode
for you to check the firmware version and all the current
setting. Simply press and hold
[ SENSOR / WI-FI ]
key for 6 seconds to exit AP mode.
IMPORTANT NOTE:
-
Please keep connecting the power during the firmware update process.
-Please make sure your PC/Mac's WI-FI connection is stable.
-
When the update process start, do not operate the PC/Mac and console until the update finished.
-
During firmware update the console will stop upload data to the cloud server. It will reconnect to your WI-FI
router and upload the data again once the firmware update succeed. If the console cannot connect to your
router, please enter the SETUP page to setup again.
-
After the firmware update, If the setup informations are missing, please input the setup information again.
-
Firmware update process have potential risk, which cannot guarantee 100% success. If the update fail,
please redo the above step to update again.
8.2
BATTERY REPLACEMENT
When low battery indicator “ ” is displayed near the antenna icon
of the sensor(s), it indicates that the outdoor 7-IN-1 sensor and/or
current channel sensor(s) battery power is low respectively. Please
replace with new batteries.
8.2.1 RE-PAIRING THE SENSOR(S) MANUALLY
Whenever you changed the batteries of the 7-in-1 weather sensor array or other additional
sensors, re-synchronization must be done manually.
1. Change all the batteries to new ones in the low battery sensor(s).
2. Press
[ SENSOR / WI-FI ]
key on the console to enter sensor synchronization mode (as
indicated by the flashing antenna
).
8.3
RESET AND FACTORY RESET
To reset the console and start again, press the
[ RESET ]
key
once or remove the backup battery
and then unplug the adapter.
To resume factory settings and remove all data, press and hold the
[ RESET ]
key for 6 seconds.
29
8.1.1 FIRMWARE UPDATE STEP
1.
Download the latest version firmware to your PC/Mac.
2. Set the console into AP (access point) mode then connect the PC/Mac to the console (refer
to
section 6.1
and
6.2
).
3.
From the SETUP page, press ADVANCED to enter advance setting
4.
Under the firmware upload section, press
Browse
to locate the firmware file saved on
your PC/Mac.
5. Press
Upload
to start firmware update.
The update time is around 5 ~ 10 minutes. While updating, the
progress will be displayed (i.e. 100 is completion).
6. The console will restart once the update is completed.
7. The console will stay in
AP mode
for you to check the firmware version and all the current
setting. Simply press and hold
[ SENSOR / WI-FI ]
key for 6 seconds to exit AP mode.
IMPORTANT NOTE:
-
Please keep connecting the power during the firmware update process.
-Please make sure your PC/Mac's WI-FI connection is stable.
-
When the update process start, do not operate the PC/Mac and console until the update finished.
-
During firmware update the console will stop upload data to the cloud server. It will reconnect to your WI-FI
router and upload the data again once the firmware update succeed. If the console cannot connect to your
router, please enter the SETUP page to setup again.
-
After the firmware update, If the setup informations are missing, please input the setup information again.
-
Firmware update process have potential risk, which cannot guarantee 100% success. If the update fail,
please redo the above step to update again.
8.2
BATTERY REPLACEMENT
When low battery indicator “ ” is displayed near the antenna icon
of the sensor(s), it indicates that the outdoor 7-IN-1 sensor and/or
current channel sensor(s) battery power is low respectively. Please
replace with new batteries.
8.2.1 RE-PAIRING THE SENSOR(S) MANUALLY
Whenever you changed the batteries of the 7-in-1 weather sensor array or other additional
sensors, re-synchronization must be done manually.
1. Change all the batteries to new ones in the low battery sensor(s).
2. Press
[ SENSOR / WI-FI ]
key on the console to enter sensor synchronization mode (as
indicated by the flashing antenna
).
8.3
RESET AND FACTORY RESET
To reset the console and start again, press the
[ RESET ]
key
once or remove the backup battery
and then unplug the adapter.
To resume factory settings and remove all data, press and hold the
[ RESET ]
key for 6 seconds.
29
8.1.1 FIRMWARE UPDATE STEP
1.
Download the latest version firmware to your PC/Mac.
2. Set the console into AP (access point) mode then connect the PC/Mac to the console (refer
to
section 6.1
and
6.2
).
3.
From the SETUP page, press ADVANCED to enter advance setting
4.
Under the firmware upload section, press
Browse
to locate the firmware file saved on
your PC/Mac.
5. Press
Upload
to start firmware update.
The update time is around 5 ~ 10 minutes. While updating, the
progress will be displayed (i.e. 100 is completion).
6. The console will restart once the update is completed.
7. The console will stay in
AP mode
for you to check the firmware version and all the current
setting. Simply press and hold
[ SENSOR / WI-FI ]
key for 6 seconds to exit AP mode.
IMPORTANT NOTE:
-
Please keep connecting the power during the firmware update process.
-Please make sure your PC/Mac's WI-FI connection is stable.
-
When the update process start, do not operate the PC/Mac and console until the update finished.
-
During firmware update the console will stop upload data to the cloud server. It will reconnect to your WI-FI
router and upload the data again once the firmware update succeed. If the console cannot connect to your
router, please enter the SETUP page to setup again.
-
After the firmware update, If the setup informations are missing, please input the setup information again.
-
Firmware update process have potential risk, which cannot guarantee 100% success. If the update fail,
please redo the above step to update again.
8.2
BATTERY REPLACEMENT
When low battery indicator “ ” is displayed near the antenna icon
of the sensor(s), it indicates that the outdoor 7-IN-1 sensor and/or
current channel sensor(s) battery power is low respectively. Please
replace with new batteries.
8.2.1 RE-PAIRING THE SENSOR(S) MANUALLY
Whenever you changed the batteries of the 7-in-1 weather sensor array or other additional
sensors, re-synchronization must be done manually.
1. Change all the batteries to new ones in the low battery sensor(s).
2. Press
[ SENSOR / WI-FI ]
key on the console to enter sensor synchronization mode (as
indicated by the flashing antenna
).
8.3
RESET AND FACTORY RESET
To reset the console and start again, press the
[ RESET ]
key
once or remove the backup battery
and then unplug the adapter.
To resume factory settings and remove all data, press and hold the
[ RESET ]
key for 6 seconds.
BATTERY REPLACEMENT
If the low battery indicator icon is displayed near the antenna icon of the sensor(s), this
indicates that the batteries in your wireless weather sensor(s) are running low and should be
replaced. Make sure to replace all batteries at the same time.
CARE AND MAINTENANCE
This display console supports OTA (over the air) Function Firmware and WI-FI System Firmware
updates via any web browser (not mobile browser) on a PC that is connected to Wi-Fi
®
. The update
function for both types of updates can be found at the bottom of the Advanced Tab on the wireless
settings interface (see Advanced Settings via Web Interface).
UPDATING THE FIRMWARE
28
6.4.1 CALIBRATION
1.
User can input the offset and/or gain values for different parameters while current offset and
gain values are shown next to their corresponding blank.
2. Once completed, press
Apply
at the bottom of the SETUP page.
The current offset value will show the previous value that you entered, please input the new
value in the blank if any changes needed, the new value will effective once you press
Apply
icon in SETUP page.
NOTE:
Calibration of most parameter is not required, with the exception of Relative Pressure, which
must be calibrated to sea-level to account for altitude effects.
7.
PROWEATHERLIVE (PWL) LIVE DATA & OPERATION
7.1
VIEW LIVE DATA
Login your ProWeatherLive account.
Once your device is connected, your device's live weather data will show on the dashboard
page.
NOTE:
Please press "Help" in the
should you have any query on the PWL operation.
8.
MAINTENANCE
8.1
FIRMWARE UPDATE
The console supports OTA firmware update capability. Its firmware may be updated over the air
anytime (whenever necessary) through any web-browser on a PC/Mac with WI-FI connectivity.
Update function, however, is not available through mobile/smart devices.
Upload
Browse
Firmware version: 1.00
Current firmware
version
Firmware update in ADVANCED page
Press to start upload the firmware
to console
Select the firmware file for update