Logia LOWSC715FWB10, Руководство пользователя, Страница: 12 / 21

22
23
UV index shows the current UV index detected by the outdoor sensor.
AIR QUALITY
This section shows the visibility distance according to the device’s location inputted into PWL. If you have
optional PM2.5/PM10 air quality sensor(s), you can also view the corresponding data in this section.
Visibility Mode
Air visibility is measured in distance (either in kilometers or miles) and is generally refer to the distance at
which an object or light can be clearly discerned, and it depends on the transparency of the surrounding air.
Additional PM2.5/PM10 Air Quality Sensors (Optional)
This console supports up to four (4) optional PM2.5/PM10 air quality sensors for you to detect different
area’s air quality. If you paired this sensor, users can press the AIR QUALITY button to check the readings in
the following display sequence: Visibility > CH1 > CH2 > CH3 > CH4 PM2.5/PM10 sensor’s reading.
Activate the Auto Loop for Air Quality
To activate the auto-loop function in this section, just press and hold the AIR QUALITY button for two (2)
seconds and the icon will show near the CH number and display the connected channels’ reading at four
(4) seconds interval.
Select the Air Quality Reading Unit
The PM2.5/PM10 sensor displays reading in PM2.5 by default. However, users can press the SET UNIT
button to change readings in the following display sequence: PM2.5 > PM10 > PM2.5 AQI > PM10 AQI.
UV Index Mode SKY CONDITION
The sky condition section shows the % of cloud cover according to the device’s location inputted into
PWL. If you have an optional lightning sensor, you can also view the lightning detection instantly.
Cloud cover mode
Cloud cover is an important component of understanding and predicting the weather.
NOTE: If the Wi-Fi connectivity is not stable for over three (3) hours, the cloud cover will not appear on
the display and the icon will disappear.
Additional Lightning Sensor (Optional)
A wireless lightning sensor can be paired with this weather station console which would enables real-
time viewing of lightning data on the display. When lightning strike is detected, red light will flash on
the sensor.
Press the SKY CONDITION button to view the following lightning information:
• Time since last lightning, and estimated lightning distance
• Number of lights per hour
• Return to Cloud Cover
Activate the Auto Loop for Sky Condition
To activate the auto-loop function in this section, just press and hold the AIR QUALITY button for two
(2) seconds and the icon will show near the CH number and display the connected channels’
reading at four (4) seconds interval.
22
UV INDEX VS SUNBURN TIME TABLE
Exposure level Low Moderate High Very high Extreme
UV index 1 2 3 4 5 6 7 8 9 10 11 12~16
Sunburn time N/A 45 minutes 30 minutes 15 minutes 10 minutes
Recommended
protection
N/A
Moderate or high UV level! Suggest to
wear sunglasses, broad brim hat and
long-sleeved clothing.
Very high or Extreme UV level! Suggest to
wear sunglasses, broad brim hat and long-
sleeved clothing, If you have to stay outdoors,
make sure to seek shade.
NOTE:
- The sunburn time is based on normal skin type, it is just a reference of UV strength. In general, the darker
one's skin is, the longer (or more radiation) it takes to affect the skin.
-The light intensity function is for sunlight detection.
4.3.11.2 UV INDEX MODE
To show the current UV index detected by the outdoor sensor.
4.3.12 AIR QUALITY
Air quality section shows the visibility distance according to the device location input in PWL. If
you have optional PM2.5/10 sensor(s), you can also view the corresponding data in this section.
4.3.12.1 VISIBILITY MODE
Air visibility is measured in distance (either in Km or Miles),
and is generally refer to the distance at which an object or light
can be clearly discerned, and it depends on the transparency
of the surrounding air. Visibility range can reach over 50Km on
exceptionally clear day, down to under 1Km on hazy day.
If the WiFi connectivity is not stable for over 3 hours, the air
visibility will not be shown, and the icon will disappear.
4.3.12.2 PM2.5/10 MODE (OPTIONAL SENSOR)
This console supports up to 4 optional PM2.5 /10 sensors
for you to detect different area's air quality. If you paired this
sensor, you can press the [ AIR QUALITY ] key to check the
readings in the following display sequence: Visibility CH1
CH2 CH3 CH4 PM2.5/10 sensor's reading.
4.3.12.3 ACTIVATE THE AUTO LOOP IN AIR QUALITY SECTION
To activate the auto-loop function in this section, just press and hold the [AIR QUALITY] key for
2 seconds and the icon will show near the CH number and display the connected channels'
reading at 4 seconds interval.
4.3.12.4 VIEW DIFFERENT READING OF PM2.5 / 10
The PM2.5 /10 sensor has default display in PM2.5. However, user may press [ UNIT ] key to
change readings in the following display sequence: PM2.5 PM10 PM2.5 AQI PM10
AQI.
NOTE:
The PM2.5 / 10 sensor is optional sensor, which is not included.
22
UV INDEX VS SUNBURN TIME TABLE
Exposure level Low Moderate High Very high Extreme
UV index 1 2 3 4 5 6 7 8 9 10 11 12~16
Sunburn time N/A 45 minutes 30 minutes 15 minutes 10 minutes
Recommended
protection
N/A
Moderate or high UV level! Suggest to
wear sunglasses, broad brim hat and
long-sleeved clothing.
Very high or Extreme UV level! Suggest to
wear sunglasses, broad brim hat and long-
sleeved clothing, If you have to stay outdoors,
make sure to seek shade.
NOTE:
- The sunburn time is based on normal skin type, it is just a reference of UV strength. In general, the darker
one's skin is, the longer (or more radiation) it takes to affect the skin.
-The light intensity function is for sunlight detection.
4.3.11.2 UV INDEX MODE
To show the current UV index detected by the outdoor sensor.
4.3.12 AIR QUALITY
Air quality section shows the visibility distance according to the device location input in PWL. If
you have optional PM2.5/10 sensor(s), you can also view the corresponding data in this section.
4.3.12.1 VISIBILITY MODE
Air visibility is measured in distance (either in Km or Miles),
and is generally refer to the distance at which an object or light
can be clearly discerned, and it depends on the transparency
of the surrounding air. Visibility range can reach over 50Km on
exceptionally clear day, down to under 1Km on hazy day.
If the WiFi connectivity is not stable for over 3 hours, the air
visibility will not be shown, and the icon will disappear.
4.3.12.2 PM2.5/10 MODE (OPTIONAL SENSOR)
This console supports up to 4 optional PM2.5 /10 sensors
for you to detect different area's air quality. If you paired this
sensor, you can press the [ AIR QUALITY ] key to check the
readings in the following display sequence: Visibility CH1
CH2 CH3 CH4 PM2.5/10 sensor's reading.
4.3.12.3 ACTIVATE THE AUTO LOOP IN AIR QUALITY SECTION
To activate the auto-loop function in this section, just press and hold the [AIR QUALITY] key for
2 seconds and the icon will show near the CH number and display the connected channels'
reading at 4 seconds interval.
4.3.12.4 VIEW DIFFERENT READING OF PM2.5 / 10
The PM2.5 /10 sensor has default display in PM2.5. However, user may press [ UNIT ] key to
change readings in the following display sequence: PM2.5 PM10 PM2.5 AQI PM10
AQI.
NOTE:
The PM2.5 / 10 sensor is optional sensor, which is not included.
22
UV INDEX VS SUNBURN TIME TABLE
Exposure level Low Moderate High Very high Extreme
UV index 1 2 3 4 5 6 7 8 9 10 11 12~16
Sunburn time N/A 45 minutes 30 minutes 15 minutes 10 minutes
Recommended
protection
N/A Moderate or high UV level! Suggest to
wear sunglasses, broad brim hat and
long-sleeved clothing.
Very high or Extreme UV level! Suggest to
wear sunglasses, broad brim hat and long-
sleeved clothing, If you have to stay outdoors,
make sure to seek shade.
NOTE:
- The sunburn time is based on normal skin type, it is just a reference of UV strength. In general, the darker
one's skin is, the longer (or more radiation) it takes to affect the skin.
-The light intensity function is for sunlight detection.
4.3.11.2 UV INDEX MODE
To show the current UV index detected by the outdoor sensor.
4.3.12 AIR QUALITY
Air quality section shows the visibility distance according to the device location input in PWL. If
you have optional PM2.5/10 sensor(s), you can also view the corresponding data in this section.
4.3.12.1 VISIBILITY MODE
Air visibility is measured in distance (either in Km or Miles),
and is generally refer to the distance at which an object or light
can be clearly discerned, and it depends on the transparency
of the surrounding air. Visibility range can reach over 50Km on
exceptionally clear day, down to under 1Km on hazy day.
If the WiFi connectivity is not stable for over 3 hours, the air
visibility will not be shown, and the icon will disappear.
4.3.12.2 PM2.5/10 MODE (OPTIONAL SENSOR)
This console supports up to 4 optional PM2.5 /10 sensors
for you to detect different area's air quality. If you paired this
sensor, you can press the [ AIR QUALITY ] key to check the
readings in the following display sequence: Visibility CH1
CH2 CH3 CH4 PM2.5/10 sensor's reading.
4.3.12.3 ACTIVATE THE AUTO LOOP IN AIR QUALITY SECTION
To activate the auto-loop function in this section, just press and hold the [AIR QUALITY] key for
2 seconds and the icon will show near the CH number and display the connected channels'
reading at 4 seconds interval.
4.3.12.4 VIEW DIFFERENT READING OF PM2.5 / 10
The PM2.5 /10 sensor has default display in PM2.5. However, user may press [ UNIT ] key to
change readings in the following display sequence: PM2.5 PM10 PM2.5 AQI PM10
AQI.
NOTE:
The PM2.5 / 10 sensor is optional sensor, which is not included.
23
4.3.13 SKY CONDITION
Sky condition section show the % of cloud cover according to the device location input in PWL. If
you have optional lightning sensor, you can also view the lightnings detected instantly.
4.3.13.1 CLOUD COVER MODE
Cloud cover is an important component of understanding and
predicting the weather. Not only does cloud cover impact sky
conditions and inform precipitation predictions, it also helps regulate
the temperature that occurs in a region.
If the WiFi connectivity is not stable for over 3 hours, the cloud cover
will not be shown, and the icon will disappear.
4.3.13.2 LIGHTNING DETECT MODE (OPTIONAL SENSOR)
Lightning detect C3129A is a optional sensor user could purchase
separately and paired with the weather station console. It enables
real-time viewing of lightning data on the display.
When lightning strike is detected, red light will flash on the sensor.
On the console, press [SKY CONDITION] button to view the
following lightning information
-Period of time since last lightning, and estimated lightning distance
-Number of light per hour.
- Return to Cloud Cover.
Number of strikes in last hour
Last lightning time and
estimated distance
4.3.13.3 ACTIVATE THE AUTO LOOP IN SKY CONDITION SECTION
To activate the auto-loop function in this section, just press and hold the [AIR QUALITY] key for
2 seconds and the icon will show near the CH number and display the connected channels'
reading at 4 seconds interval.
NOTE:
The lightning sensor is optional sensor, which is not included.
4.3.14 MAXIMUM / MINIMUM RECORDS
The console can record MAX /
MIN readings both daily and since
last reset.
Daily MAX
reading
Daily MIN
reading
MAX reading
since last reset
MIN reading
since last reset
4.3.14.1 DAILY AND SINCE MAX / MIN RECORDS
In normal mode, press [ MAX / MIN ] key to check the records of the on screen reading in the
following display sequence: daily MAX records daily MIN records since MAX records
since MIN records.
4.3.14.2 TO CLEAR THE MAX/MIN RECORDS
Press and hold
[ MAX / MIN ]
key for 2 seconds to reset all the MAX and MIN records.
23
4.3.13 SKY CONDITION
Sky condition section show the % of cloud cover according to the device location input in PWL. If
you have optional lightning sensor, you can also view the lightnings detected instantly.
4.3.13.1 CLOUD COVER MODE
Cloud cover is an important component of understanding and
predicting the weather. Not only does cloud cover impact sky
conditions and inform precipitation predictions, it also helps regulate
the temperature that occurs in a region.
If the WiFi connectivity is not stable for over 3 hours, the cloud cover
will not be shown, and the icon will disappear.
4.3.13.2 LIGHTNING DETECT MODE (OPTIONAL SENSOR)
Lightning detect C3129A is a optional sensor user could purchase
separately and paired with the weather station console. It enables
real-time viewing of lightning data on the display.
When lightning strike is detected, red light will flash on the sensor.
On the console, press [SKY CONDITION] button to view the
following lightning information
-Period of time since last lightning, and estimated lightning distance
-Number of light per hour.
- Return to Cloud Cover.
Number of strikes in last hour
Last lightning time and
estimated distance
4.3.13.3 ACTIVATE THE AUTO LOOP IN SKY CONDITION SECTION
To activate the auto-loop function in this section, just press and hold the [AIR QUALITY] key for
2 seconds and the icon will show near the CH number and display the connected channels'
reading at 4 seconds interval.
NOTE:
The lightning sensor is optional sensor, which is not included.
4.3.14 MAXIMUM / MINIMUM RECORDS
The console can record MAX /
MIN readings both daily and since
last reset.
Daily MAX
reading
Daily MIN
reading
MAX reading
since last reset
MIN reading
since last reset
4.3.14.1 DAILY AND SINCE MAX / MIN RECORDS
In normal mode, press [ MAX / MIN ] key to check the records of the on screen reading in the
following display sequence: daily MAX records daily MIN records since MAX records
since MIN records.
4.3.14.2 TO CLEAR THE MAX/MIN RECORDS
Press and hold [ MAX / MIN ] key for 2 seconds to reset all the MAX and MIN records.
23
4.3.13 SKY CONDITION
Sky condition section show the % of cloud cover according to the device location input in PWL. If
you have optional lightning sensor, you can also view the lightnings detected instantly.
4.3.13.1 CLOUD COVER MODE
Cloud cover is an important component of understanding and
predicting the weather. Not only does cloud cover impact sky
conditions and inform precipitation predictions, it also helps regulate
the temperature that occurs in a region.
If the WiFi connectivity is not stable for over 3 hours, the cloud cover
will not be shown, and the icon will disappear.
4.3.13.2 LIGHTNING DETECT MODE (OPTIONAL SENSOR)
Lightning detect C3129A is a optional sensor user could purchase
separately and paired with the weather station console. It enables
real-time viewing of lightning data on the display.
When lightning strike is detected, red light will flash on the sensor.
On the console, press [SKY CONDITION] button to view the
following lightning information
-Period of time since last lightning, and estimated lightning distance
-Number of light per hour.
- Return to Cloud Cover.
Number of strikes in last hour
Last lightning time and
estimated distance
4.3.13.3 ACTIVATE THE AUTO LOOP IN SKY CONDITION SECTION
To activate the auto-loop function in this section, just press and hold the [AIR QUALITY] key for
2 seconds and the icon will show near the CH number and display the connected channels'
reading at 4 seconds interval.
NOTE:
The lightning sensor is optional sensor, which is not included.
4.3.14 MAXIMUM / MINIMUM RECORDS
The console can record MAX /
MIN readings both daily and since
last reset.
Daily MAX
reading
Daily MIN
reading
MAX reading
since last reset
MIN reading
since last reset
4.3.14.1 DAILY AND SINCE MAX / MIN RECORDS
In normal mode, press [ MAX / MIN ] key to check the records of the on screen reading in the
following display sequence: daily MAX records daily MIN records since MAX records
since MIN records.
4.3.14.2 TO CLEAR THE MAX/MIN RECORDS
Press and hold [ MAX / MIN ] key for 2 seconds to reset all the MAX and MIN records.
Number of strikes in last hour
Last lightning time and
estimated distance